Instruction manual

1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 62/114
Each device is represented by an horizontal row that includes as many rows as many information are
available from the instrument.
For each row, the blue bar contains the address and the instrument name followed by the typology to
which the instrument belongs to. At the end of the blue bar there is the command box “Sel”.
The second row of a main row contains the set-point and the analogue inputs like the probe values or
other peculiar information of the instrument read-outs such as the electrical measurements of a net
analyser.
The third row of a main row is divided in three parts: the first area contains the icon symbols of the
instrument status, the second area contains the icon symbols of the instrument outputs (relays) and the
third area shows the digital input status with their complete description.
An icon not surrounded by a blue square means the corresponding function is not active. The active
status of an instrument function is represented with the corresponding blue icon.
More information about the icon function can be red, pointing the mouse arrow over a single icon, on the
left down corner of the browser border.
 Devices in alarm
In case of alarm event the corresponding instrument is signalled with the red blinking description.
Immediately also the message box, on the top of the browser bar, will indicate the alarm situation with a
red “Alarms” label.
Find the complete alarm description clicking on the row blue bar.
A pop up message box will appear, inside you will find the list of the actual alarms that also includes the
starting date of each event.