Troubleshooting guide

87
1. Press “Setup”
2. Select “Enable” for Liquid Pos. Valve
3. Press “OK”
4. Press “Vilter Only”, you will be prompted to Log In
5. Press “Liquid Inj. Temp Control” then you will see the
screen as in the attached picture “Liquid Inj. Control”,
the values you see there are default and can be changed
according to your application.
Setup Screen
Vilter Only Screen
Liquid Inj. Temp Control Screen
NOTE:
Consult the VSS / VSM / VSR Unit Manual for proper
Danfoss ICM valve setup procedure.
Danfoss Liquid Injection Valves