Troubleshooting guide

36
setpoint. The alarm or trip will be active if
the oil temperature of the separator drops be-
low the setpoint value.
· Low Oil Injection Temperature – This is the
low oil injection safety. The alarm or trip will
be active if oil injection temperature drops
below setpoint value after a time delay (Oil
Injection Temperature Safety Changeover).
· High Oil Injection Temperature – This is the
high oil injection temperature safety. The
alarm or trip will be active on a rise in oil in-
jection temperature above the setpoint value.
· Low Control Temperature – This is the low
control temperature safety. This safety is ac-
tive when process temperature control has
been selected in the Setup screen. An alarm
or trip will be active on a drop in process tem-
perature below the setpoint value.
· High Control Temperature – This is the high
control temperature safety. This safety is ac-
tive when the temperature control has been
selected in the Setup screen. An alarm will
be active on an increase in process tempera-
ture above the setpoint value.
Compressor Alarm and Trip