Troubleshooting guide

26
From the Main screen touch the Maintenance button.
“Service Item Required” message indicates that the compressor runtime hours has accumulated to a value - or a
point- where service Maintenance is required.
>From the main screen, press the “Maintenance” button. A chart will be shown to indicate what service is required
- based on the number of hours the compressor has run.
After the all required service work has been accomplished, press the “Service” button located on the Maintenance
screen. A “Services Completed” screen will appear. Press on each service that has been completed. A “check” will
appear next to each item that has been pressed. When all required services have been completed, and the appropriate
box has been checked in the “Services Completed” screen, then the “Service Item Required” message will disappear
on the main screen.
Note: All of the service items listed for that interval must be checked before the “Servicing Item Required” message
will disappear.
Touch Here
Maintenance Screen