Troubleshooting guide

25
Set Up Screen
Press Log on/Save Button and the above screen will appear. When altering setpoints, log on is necessary. Select
appropriate user name and enter password to change setpoints. This screen is also used to backup and save setpoints
by pressing (Backup Settings).
After performing a “Back up Setting” operation, DO NOT power down the Vission/Vantage panel for atleast 1
minute. This will allow adequate time to insure all setpoints have been properly stored.
Log On, Off,or Save Changes
Version Screen
To View if a customized program has been installed in your unit, go to the main screen and press VERSION, a
screen will appear with the program version and the make model of the unit.