Troubleshooting guide

22
Main Screen
This Screen contains buttons to navigate
to setpoint, setup and maintenance screens.
Status information on the compressor, oil pump,
oil heater and run mode.
Start/Stop buttons.
Hour meter.
Motor amperage.
Refrigerant.
Real time compressor
and package operating conditions.
Volume and Capacity Slide locations.
The Main Screen
This screen has been designed to give
the operator an overall view of all operating
parameters affecting the compressor pack-
age. This screen should always be displayed
when maintenance items and setpoint items
are not being performed. The date on the
screen is updated every ½ second. Status
information such as Alarms and Trips are
displayed on the screen.