Service manual

Vission 20/20 • Operation and Service Manual •Vilter/Emerson • 35391SC 2.0
READ CAREFULLY BEFORE OPERATING YOUR COMPRESSOR.
The following instructions have been prepared to assist in operation of Vilter Vission 20/20 micro-controllers.
The entire manual should be reviewed before attempting to operate.
Vilter micro-controllers are thoroughly inspected at the factory. However, damage can occur in shipment.
For this reason, the equipment should be thoroughly inspected upon arrival. Any damage noted should be
reported immediately to the Transportation Company. This way, an authorized agent can examine the unit,
determine the extent of damage and take necessary steps to rectify the claim with no serious or costly delays.
At the same time, the local Vilter representative or the home office should be notified of any claim made.
All inquires should include the Vilter sales order number, compressor serial and model number. These can be
found on the compressor nameplate on the compressor.
All requests for information, services or parts should be directed to:
Vilter Manufacturing LLC
Customer Service Department
P.O. Box 8904
5555 South Packard Ave
Cudahy, WI 53110-8904 USA
Telephone: [phone]
Fax:[phone]
E-mail: [e-mail]
Equipment Identification Numbers:
Vilter Order Number: _______________________Software Version: _________________
Vilter Order Number: _______________________Software Version: _________________
Vilter Order Number: _______________________Software Version: _________________
Vilter Order Number: _______________________Software Version: _________________
Important Message
ii