Service manual

B - 23
Vission 20/20 • Operation and Service Manual •Vilter/Emerson • 35391SC 2.0
Appendix B • Vission 20/20 Application Procedures
Danfoss Liquid Injection Valve Setup
NOTE
Consult the VSS / VSM / VSR Unit Manual for proper Danfoss ICM valve setup procedure.
Figure B-10. Confi guration Screen - Page 2 (Oil Cooling section)
The Danfoss Liquid Injection valve is selected from the Confi guration Screen - Page 2 (Under Oil Cooling Section.)
The settings for the Danfoss Liquid Injection are setup in the Compressor Control Menu - Page 4.
Figure B-11. Compressor Control Menu - Page 4 (Liquid Injection settings)