Service manual

19 – 8
Vission 20/20 • Operation and Service Manual •Vilter/Emerson • 35391SC 1.9
Analog Inputs
The Vission 20/20 has several Analog inputs that the op-
erator can choose how the input will be used. Once an
input is enabled, the Auxiliary I/O screen will be available
from the menu screen where the operator can further
defi ne the inputs operation, see Figure 19-4.
Enable Input #:
• Enables the selected analog input.
Set Name:
• Allows the operator to assign a name to the input.
Section 19 • Configuration
Figure 19-4. Confi guration Screen - Analog Auxiliaries (Page 4)