Service manual

22 – 3
Vission 20/20 • Operation and Service Manual •Vilter/Emerson • 35391SC 1.9
either select the username from the operators win-
dow or enter the username manually by touching
the entry box and entering the name via the pop-up
keyboard.
Operator Password:
• This entry box is for the operator’s password. The
password can be entered by touching the password
entry box and entering the password via the pop-up
keyboard.
Verify Password:
• This entry box is to verify the operator’s password.
Verifying the password can be entered by touching
the “Verify Password” entry box and entering the
password via the pop-up keyboard.
Security Level:
• Select a security level for the account being added or
modifi ed. Only levels that are equal to or less than the
operator’s own security level will be shown.
Add / Update:
• Pressing this button will initiate the creation or modi-
fi cation of the specifi ed account.
Delete:
• Pressing this button will delete the specifi ed account.
VNC Account
Vission 20/20 panels can be accessed remotely by us-
ing a VNC client over TCP/IP network. This tab allows
the operator to change default VNC Password and VNC
Port number, see Figure 22-3. User Access Screen - VNC
Accounts.
Change VNC Password
New Password:
• The operator will add the password by touching the
entry box and typing the password via the pop-up
keyboard.
Section 22 • User Access
Figure 22-3. User Access Screen - VNC Accounts