User`s manual
Table Of Contents
- Home
- Contents
- Introduction
- USB Fieldbus Interface
- Software installation and device setup
- Fieldbus Interface Configuration utility
- Using with AMS Device Manager
- Using with an FDT Frame Application
- Troubleshooting
- Approvals and certifications
- Specifications
- Waste disposal
- Install drivers manually
- Disable driver signature enforcement in Windows 8.0 and 8.1
- Remove pre-release driver versions on a Windows XP operating system
- Index
3.3 Install the Communication DTM software
1. Insert the USB Fieldbus Interface installation CD into the CD drive of your
computer.
2. Navigate to the Emerson USB Fieldbus Interface DTM folder and double-
click Setup.exe.
3. Click Next and follow the prompts on the installation window.
Communication DTM installationFigure 3-2:
4. Click Finish when done.
3.4 Install the Emerson DTM Library
1. Insert the USB Fieldbus Interface installation CD into the CD drive of your
computer.
2. Navigate to the Emerson DTM Library folder.
The DTM library folder is typically named "Emerson Process Management
FF Device DTM Library v1.x.x".
3. Double-click Setup > Setup.exe.
4. Click Next and follow the prompts on the installation window.
User's Manual May 2014
12