Instruction Manual

Figure 7. Type C486 Assemblies
APPLY LUBRICANT
(1)
L = MULTI-PURPOSE PTFE LUBRICANT
1. Lubricants must be selected such that they meet the temperature requirements.
PARTS NOT SHOWN: 20 AND 21
SECTION A - A
SEE DETAIL C
SECTION B - B SECTION C
TORQUE:
90 to 100 inch-lbs /
10 to 11 N•m
TORQUE:
90 to 100 inch-lbs /
10 to 11 N•m
TORQUE:
50 to 75 inch-lbs /
5.6 to 8.5 N•m
TORQUE:
50 to 75 inch-lbs /
5.6 to 8.5 N•m
L
A
A
B
B
L
L
15R
15C
15J
15S
15A
15B
15D
15E
16
10
11
23
12
59
55
58
18
4
8
7
36
9
3
6
13
13
19
55
57
59
2
5
33
34
35
1
14
22
15P
15L
15K
15M
15E
15H
15G
15F
Types C471, C477 and C486
©Emerson Process Management Regulator Technologies, Inc. 2002, 2014; All Rights Reserved
For further information visit www.fisherregulators.com
LP-Gas Equipment
Emerson Process Management
Regulator Technologies, Inc.
USA - Headquarters
McKinney, Texas 75070, USA
Tel: [phone]
Outside U.S.: [phone]
The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners. Fisher
®
is a mark owned by Fisher Controls International LLC,
a business of Emerson Process Management.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or
guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specications of such
products at any time without notice.
Emerson Process Management Regulator Technologies, Inc. does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and
maintenance of any Emerson Process Management Regulator Technologies, Inc. product remains solely with the purchaser.