Brochures and Data Sheets

Trellis
TM
Site Manager
Emerson, Emerson Network Power, and the Emerson Network Power logo are trademarks and service marks
of Emerson Electric Co. Avocent, Trellis and the Trellis logo are trademarks and service marks of Avocent
Corporation. All other marks and logos are the intellectual property of their respective owners. ©2014
Emerson Electric Co. All rights reserved.
0914-TRELLIS_SM-DS-EN
Monitor and respond to critical devices
intelligently
• See device status (Normal, In Alarm, Maintenance Mode, Not
Responding) on a graphical floor plan and in real time to get a
more comprehensive view of actual device health
• Configure data points for collection and assign data collection
intervals
• Categorize and visualize data via Configure, Control, Support and
Specification tabs
• Use Accelerated Polling to monitor trends during power outage
and when running on battery power for maintenance; compare
load with run time to provide additional measurement of load
percentage versus available battery run time
• Control and command other devices to perform actions using an
alarm as a trigger, minimizing need for personnel intervention
(i.e., high temperature); gather data from any device in the
system once alarm is triggered
• Real-time tracking of aisle temperature during extended power
outage via Cold Aisle Temperature Sensors and track aisle
temperature or evaluate high room temperature events
• Get notifications via SNMP, SMS or email and based on working
hours of facilities personnel so alarms are addressed to the right
person promptly; determine delivery based on notification states
(Success, Failed or Pending)
• Provide alarm attributes, filters, transitions, views (active and
audit/calendar) as well as actions (acknowledgment, escalation,
accelerations, etc.,); assign alarms and notification rules
according to user role
• Use logical operators (AND, OR, NOT) to create logic between
alarms so notifications are sent only after conditions of related
alarm are met; no notification sent if action is no longer needed
• Suppress alarms so users won’t need to spend time receiving
and checking notifications from devices that send erroneous,
intermittent alarms
• Use Summary View to see what alarm merits immediate
attention and to see alarms side-by-side to understand their
context, cause and relationship, if any
Track consumption in real time for better
efficiency
• Use the unified dashboard to see real-time data, energy usage
and operating efficiency together; key information helps
determine system peak performance, maximize energy usage
and minimize energy waste
• Customize dashboards so users can enter data manually if the
data center is not properly instrumented for measuring total
facility or IT load
• Gauge efficiency and comply with current and historical industry-
approved efficiency metrics (PUE and DCIE)
• Compute real-time power consumption (kW/hour) for a device
and determine ways to balance capacity and demand within the
data center
• Eliminate readings from one or more devices when making PUE
and DCIE calculations in a mixed-use (office space + data center)
data center facility
• Configure source and currency details that facilitate utility cost
calculations at the system and unit levels… so you can determine
actual costs, not just consumption
• Understand capacity usage to ensure business-critical services
are always up and running while lowering operating costs; roll
out measures to improve peak performance
Trellis
TM
Site Manager
Emerson Network Power
Solution Suite
Emerson Network Power
EmersonNetworkPower.com