Brochure

23
Data/signal line surge protection
STC-POE SERIES
e SolaHD STC Power-over-Ethernet (PoE) series is
designed to work on Category 5 PoE transmission lines
as well as Category 6 applications. ey feature both
female to female and male to female RJ-45 connection
options for ease of installation.
Power-over-Ethernet is a technology for wired Ethernet
LANs (Local Area Networks) that allows the electrical
current to be carried by the data cables rather than
power cords. is minimizes the number of wires that
must be strung in order to install the network. e
result is lower cost, less downtime, easier maintenance
and greater installation exibility than with traditional
wiring.
PoE allows users to power devices over Ethernet
cabling. Power and networking is provided over a single
cable. PoE has tremendous advantages in industrial
applications. e ease of combining signal and power
in a single Ethernet cable connection is contributing
to the already rapid evolution of Ethernet-based
industrial control systems. Category 5e and Category
6 commonly known as Cat5e and Cat6 are the most
widely used Ethernet connectivity methods on the
market today. Cat5e and Cat6 are dened in ANSI/
TIA/EIA 568-B standard for Unshielded Twisted Pair
Cabling.
Specications
DESCRIPTION STC-P0E-65FF STC-CAT6-POE-I
Mode of Protection
Normal Mode (L-L)
All Lines (1-8) Protected
All Lines (1-8) Protected (L-L) and (L-G)
Signal High-Low; High-Ground; Low-Ground
DC Breakover Voltage 60 Vdc
Insertion Loss < .1 dB
Certied Transmission Speeds 10baseT, 100baseT, 1000baseT
Peak Surge Energy 300 Watt 750 Watt
Response Time <1 ns
Connectors RJ-45 (Female - Female)
Dimensions - in (mm) 2.30 x 1.00 x .80 (58.4 x 25.4 x 20.3) 5.40 x 1.60 x 1.70 (137.2 x 40.7 x 43.2)
Warranty 3 year limited warranty 5 year limited warranty
e STC PoE series is ideally suited to protect expensive equipment
and critical communication/data transfer from internally generated
transients and noise.
Features
• Exceeds CAT 5 PoE & 6 transmission values
• Applications up to 60 Vdc @ 300 mA
• ree year limited warranty
STC-POE-65FF
Features
• Single use design
• 60 Vdc @ 300 mA continuous
• Cost eective protection
STC-CAT6-POE-I
Features
• Hybrid PTC (positive temperature coecient) resettable fuse -
up to 5,000 times
• 60 Vdc @ 750 mA continuous
• Isolated ground available
• 10kA peak surge current
• Premium protection
CATALOG NUMBER DESCRIPTION
STC-P0E-65FF
Female to Female Connector
STC-CAT6-P0E-I
Female to Female Connector with isolated
ground
STC-C6-MP4
CAT 6 PoE Mounting Plate
Selection Table