User Manual

4Sensi Touch Smart Thermostat | MANUAL OPERATION GUIDE
Switching system mode
Press the mode button (see buttons and icons) to
switch between all available system mode settings.
When the mode is “Off” the thermostat will not
bring on your heating or cooling systems.
Fan mode
If you want to circulate the indoor blower, you can switch
fan mode to “On.” Turn the fan back to “Auto” when you want
the thermostat to control your indoor blower as necessary.
Leaving the fan in “On” will run your blower continuously.
Holding one temperature
If you want to hold one temperature, turn Schedule “Off.” Then,
adjust the set point using the up and down arrow buttons.
The thermostat will hold this temperature, in the set system
mode, until you turn Schedule back “On” or until you adjust
the set point again using the up and down arrow buttons.
Temporary hold
When your Schedule is “On,” your Sensi thermostat
controls your home based on the time and temperature
settings in the current schedule. To temporarily change
your temperature, use the up and down arrows in the app
or on the thermostat. Your Sensi thermostat will display
the time it will hold for next to the set temperature. It
will hold your new temperature until the next scheduled
set point with a minimum hold time of two hours.
BASIC FUNCTIONALITY