Installation Guide

Sensi Touch Smart Thermostat | INSTALLATION GUIDE 4
Installation
Once you have downloaded the Sensi app, and have created an account, you
are ready to install the thermostat to your wall and connect it to Wi-Fi. If no
thermostats are registered yet, tap the plus (+) sign to add a thermostat.
First, choose which thermostat you purchased. The Sensi Touch
Smart Thermostat option is for the following model numbers:
• 1F95U-42WF series
• ST75 series
• NH-AWIFI, OH-AWIFI
Note: You can check your model number on the
back of the thermostat faceplate.
Install Path
After creating an account, signing in and choosing your model, the app
will ask you whether or not the thermostat is already on the wall. You will
either choose “No, it needs to be installed,” or “Yes, it is on the wall.”
The first option will walk through the entire installation process. If you did
not have this thermostat professionally installed, choose this option.
The second option is for connecting your thermostat to Wi-Fi only. If you have
had a professional install your thermostat, and you just need to connect
the Sensi thermostat to your home Wi-Fi network, choose this option.
No, it needs to be installed.
This option will walk you through the entire installation process, including
identifying and connecting your wiring, as well as connecting to Wi-Fi. The
Sensi app will walk through a step-by-step process for installation.
Gather Tools
and Package Contents
Gather all the necessary tools for installation.
Select your thermostat
9:41
Cancel
Add Thermostat
Wi-Fi Thermostat
74
Touch Wi-Fi Thermostat
Is you thermostat on the wall
Use HomeKit
9:41
Cancel
Add Thermostat
No, it needs to be installed
Yes, it is on the wall
Previous
Gather Tools and Package Contents
9:41
Cancel
Install
Before we begin, you’ll need to gather the
rolling tools: Phillips and/or Flathead
Screwdriver, Drill with 3/16 (4 mm) bit, Wire
Cutter. You may also need needle-nose
pliers.
Video: Installation overview
Previous
Next
INSTALLING THE SENSI THERMOSTAT