Instruction manual

MODEL XMT-A-FF/FI SECTION 5.0

DISPLAY AND OPERATION

1. If a security code has been programmed, pressing MENU causes the security

screen to appear.

2. Enter the three-digit security code.

a. If a security code has been assigned to configure only, entering it will unlock

all the menus.

b. If separate security codes have been assigned to calibrate and configure,

entering the calibrate code will allow the user access to only the calibrate and

hold menus; entering the configuration code will allow the user access to all

menus.

3. If the entered code is correct, the main menu screen appears. If the code is incor-

rect, the Invalid Code screen appears. The Enter Security Code screen reap-

pears after two seconds.

Enter Security

Code: 0

Invalid Code

5.3 SECURITY

5.3.1 How the Security Code Works

Use security codes to prevent accidental or unwanted changes to program settings, displays, and calibration. Two three-

digit security codes can be used to do the following…

a. Allow a user to view the default display and information screens only.

b. Allow a user access to the calibration and hold menus only.

c. Allow a user access to all the menus.

5.3.2 Bypassing the Security Code

Enter 555. The main menu will open.

5.3.3 Setting a Security Code

See Section 7.5.