Instruction manual

MODEL XMT-A-FF/FI SECTION 3.0

SENSOR WIRING

SECTION 3.0

SENSOR WIRING

3.1 WIRING MODEL 499A OXYGEN, CHLORINE, MONOCHLORAMINE, AND OZONE SENSORS

All 499A sensors (499ADO, 499ATrDO, 499ACL-01, 499ACL-02, 499ACL-03, and 499AOZ) have identical wiring.

Use the pigtail wire and wire nuts provided with the sensor when more than one wire must be attached to a single termi-

nal.

FIGURE 33. Xmt-A-FF wall/pipe mount; 499A sen-

sors with standard cable

FIGURE 3-4. Xmt-A-FF wall/pipe mount; 499A sen-

sors with optimum EMI/RFI or Variopol cable

FIGURE 3-1. Xmt-A-FF panel mount; 499A sensors

with standard cable

FIGURE 3-2. Xmt-A-FF panel mount; 499A sensors

with optimum EMI/RFI or Variopol cable