Instruction manual

ESSENTIAL INSTRUCTIONS
READ THIS PAGE BEFORE PROCEEDING!
Rosemount Analytical designs, manufactures, and tests its products to meet many national and international
standards. Because these instruments are sophisticated technical products, you must properly install, use, and
maintain them to ensure they continue to operate within their normal specifications. The following instructions
must be adhered to and integrated into your safety program when installing, using, and maintaining Rosemount
Analytical products. Failure to follow the proper instructions may cause any one of the following situations to
occur: Loss of life; personal injury; property damage; damage to this instrument; and warranty invalidation.
• Read all instructions prior to installing, operating, and servicing the product. If this Instruction Manual is not the
correct manual, telephone [phone] and the requested manual will be provided. Save this Instruction
Manual for future reference.
• If you do not understand any of the instructions, contact your Rosemount representative for clarification.
• Follow all warnings, cautions, and instructions marked on and supplied with the product.
• Inform and educate your personnel in the proper installation, operation, and maintenance of the product.
• Install your equipment as specified in the Installation Instructions of the appropriate Instruction Manual and per
applicable local and national codes. Connect all products to the proper electrical and pressure sources.
• To ensure proper performance, use qualified personnel to install, operate, update, program, and maintain the
product.
• When replacement parts are required, ensure that qualified people use replacement parts specified by
Rosemount. Unauthorized parts and procedures can affect the product’s performance and place the safe
operation of your process at risk. Look alike substitutions may result in fire, electrical hazards, or improper
operation.
• Ensure that all equipment doors are closed and protective covers are in place, except when maintenance is
being performed by qualified persons, to prevent electrical shock and personal injury.
About This Document
This manual contains instructions for installation and operation of the Model Solu Comp Xmt-
A-FF/FI Dissolved Oxygen, Chlorine, and Ozone Transmitter.
The following list provides notes concerning all revisions of this document.
Rev. Level
Date Notes
A 10/04 This is the initial release of the product manual.
D 9/05 Add Foundation fieldbus agency approvals and FISCO version.
E 2/06 All Foundation Fieldbus and FISCO drawings added, pp. 20-37. Added
six languages in description and specifications, and included model
option -FI in section 1.0, page 1.
F 6/08 Update warning labels and drawings
G 12/09 Update DNV logo and company name
CAUTION
If a Model 375 Universal Hart
®
and FOUNDATION
®
Fieldbus Communicator is used with these
transmitters, the software within the Model 375 may
require modification.
If a software modification is required, please contact
your local Emerson Process Management Service
Group or National Response Center at
1-800-654-7768.
WARNING
EXPLOSION HAZARD
DO NOT OPEN THE WHILE CIRCUIT IS LIVE
DO NOT RUB OR CLEAN WITH SOLVENTS.