Instruction manual

MODEL Xmt-A-FF/FI SECTION 16.0
MAINTENANCE
SECTION 16.0
MAINTENANCE
TABLE 16-1. REPLACEMENT PARTS FOR SOLU COMP XMT (PANEL MOUNT VERSION)
PART NUMBER DESCRIPTION SHIPPING WEIGHT
23823-00 Panel mounting kit, includes four brackets and four set screws 2 lb/1.0 kg
33654-00 Gasket, front, for panel mount version 2 lb/1.0 kg
33658-00 Gasket, rear cover, for panel mount version 2 lb/1.0 kg
TABLE 16-2. REPLACEMENT PARTS FOR SOLU COMP XMT (PIPE/SURFACE MOUNT VERSION)
PART NUMBER DESCRIPTION SHIPPING WEIGHT
33655-00 Gasket for pipe/surface mount version 2 lb/1.0 kg
23833-00 Surface mount kit, consists of four self tapping screws and 1 lb/0.5 kg
four O-rings
16.1 OVERVIEW
The Solu Comp Xmt needs little routine maintenance. The calibration of the analyzer and sensor should be
checked periodically. To recalibrate the sensor and analyzer, refer to sections 9 through 14.
16.2 REPLACEMENT PARTS
Only a few components of the analyzer are replaceable. Refer to the tables below. Circuit boards, display, and
enclosure are not replaceable.
103