Instruction manual

46
MODEL XMT-C SECTION 6.0
OPERATION WITH MODEL 375
HART output
PV is Process
SV is Temperature
TV is Raw process
Poll addr
Burst option [PV, %range/current, Process vars/crnt]
Burst mode [Off, On]
Num req preams
Num resp preams
Device information
Distributor
Model
Dev id
Tag
Date
Physicl signl code
Write protect
Snsr text
Descriptor
Message
Revision #'s
Universal rev
Fld dev rev
Software rev
Hardware rev
Local Display
AO LOI units [mA, %]
LOI cfg code
LOI cal code
Load Default Conf.
Review
PV
PV AO
PV LRV
PV URV
--------------------------------------------------------------------------------
Notes:
* Can be Cond, Res, NaOH, HCl, H2SO4, NaCl, TDS or Custom
** Valid only when PV Type = NaOH, HCl, 0-25% H2SO4, or NaCl
*** Valid only when Temp comp type = Linear
**** Valid only when PV Type = Custom
*. Valid only when PV Sensor Type = Toroidal
*.. Valid only when PV Type = Conductivity or Resistivity. For contacting sensors,
the item list is [Linear, Neutral salt, Cation, None/off].
For toroidal sensors, the item list is [Linear, None/off].
*... Valid only when PV Sensor Type = Contacting
/* Xmt CT done */
FIGURE 6-2. XMT-C-HT HART/Model 375 Menu Tree (3 of 3)