Instruction manual

MODEL 5081-C SECTION 7.0
PROGRAMMING
1. Press PRo G on the remote controller.
2. Press NEXT until the dEFAULt appears in the display. Press ENTER.
3. u se  or

to toggle between nO and yES. With yES showing, press ENTER to return
to factory default settings.
PRo GRAM
tYPE
EXiT ENTER
02
PRo GRAM
dISPLAY
EXiT NEXT ENTER
7.7 DEFAULT
7.7.1 Purpose
This section describes how to erase ALL user-defined configuration settings and return the transmitter to factory default
settings. All custom curve values and settings will be deleted.
7.7.2 Procedure
50