Instruction manual

Emerson Process Management

2400 Barranca Parkway

irvine, CA 92606 u SA

Tel: (949) 757-8500

Fax: (949) 474-7250

http://www.raihome.com

ESSENTIAL INSTRUCTIONS

READ THIS PAGE BEFORE PROCEEDING!

Rosemount Analytical designs, manufactures, and tests its products to meet many national and international

standards. Because these instruments are sophisticated technical products, you must properly install, use, and

maintain them to ensure they continue to operate within their normal specifications. The following instructions

must be adhered to and integrated into your safety program when installing, using, and maintaining Rosemount

Analytical products. Failure to follow the proper instructions may cause any one of the following situations to

occur: Loss of life; personal injury; property damage; damage to this instrument; and warranty invalidation.

• Read all instructions prior to installing, operating, and servicing the product. if this instruction Manual is not the

correct manual, telephone 1-800-654-7768 and the requested manual will be provided. Save this instruction

Manual for future reference.

• if you do not understand any of the instructions, contact your Rosemount representative for clarification.

• Follow all warnings, cautions, and instructions marked on and supplied with the product.

• inform and educate your personnel in the proper installation, operation, and maintenance of the product.

• install your equipment as specified in the installation instructions of the appropriate instruction Manual and per

applicable local and national codes. Connect all products to the proper electrical and pressure sources.

• To ensure proper performance, use qualified personnel to install, operate, update, program, and maintain the

product.

• When replacement parts are required, ensure that qualified people use replacement parts specified by

Rosemount. u nauthorized parts and procedures can affect the product’s performance and place the safe

operation of your process at risk. Look alike substitutions may result in fire, electrical hazards, or improper

operation.

• Ensure that all equipment doors are closed and protective covers are in place, except when maintenance is

being performed by qualified persons, to prevent electrical shock and personal injury.

CAUTION

if a 375 or 475 u niversal Hart

Communicator is used with these transmitters, the software within the 375 or 475 may require

modification. if a software modification is required, please contact your local Emerson Process Management Service Group

or National Response Center at 1-800-654-7768.

About This Document

This manual contains instructions for installation and operation of the Model 5081-C Two-Wire

Conductivity Transmitter. The following list provides notes concerning all revisions of this document.

Rev. Level Date Notes

A 10/04 This is the initial release of the product manual. The manual has been

reformatted to reflect the Emerson documentation style and updated to

reflect any changes in the product offering. This manual contains

information on HART Smart and F

o u Nd ATio N Fieldbus versions of 5081-C.

B 2/05 Revised dwg 1400204 on page 29.

C 5/05 Fixed LEd font problems on pages 4, 34, 38, 39, 43.

E 11/12 Added Fieldbus specifications, updated iTK revision and CE certifications