Instruction manual

78
MODEL XMT-P pH/ORP SECTION 7.0
PROGRAMMING THE TRANSMITTER
Default Display
Display Contrast
7.10.2 Procedure: Choosing a display screen.
Calibrate Hold
Program Display
1. Press MENU. The menu screen appears. Choose Display.
2. Choose Default Display.
3. Press
ê
until the desired screen appears. Press ENTER.
4. The display returns to the screen in step 2. Press MENU then EXIT to return to
the main display.
7.10 SELECTING A DEFAULT SCREEN AND SCREEN CONTRAST
7.10.1 Purpose
This section describes how to do the following:
1. Set a default screen. The default screen is the screen shown during normal operation. The Solu Comp Xmt allows
the user to choose from a number of screens. Which screens are available depends on the measurement the trans-
mitter is making.
2. Change the screen contrast.
Default Display
Display Contrast
Display contrast
Lighter Darker
7.10.3 Procedure: Changing screen contrast.
Calibrate Hold
Program Display
1. Press MENU. The menu screen appears. Choose Display.
2. Choose Display Contrast.
3. To increase the contrast, select darker. Press ENTER. Each key press increases
the contrast. To reduce the contrast, select lighter, Press ENTER. Each key press
decreases the contrast.
4. To return to the main display, press MENU then EXIT.
NOTE:
Screen contrast can also be adjusted from the main display. Press MENU and é at
the same time to increase contrast. Press MENU and
ê
at the same time to decrease
contrast. Repeatedly pressing the arrow key increases or reduces the contrast.