Instruction manual

59
MODEL XMT-P pH/ORP SECTION 6.0
OPERATION WITH MODEL 375
Glass fault low setpoint
Glass warn high setpoint
Glass warn low setpoint
Temperature Compensation
Secondary value units
Sensor temp comp
Sensor temp manual
Temp Sensor Ohms
Sensor type temp
Sensor connection
Operating isopot ph
Isopotential pH
Temperature coeff
Reset transducer/Load factory defaults
Identification
Software version
Hardware version
LOI config code
LOI calibration code
Sensor S/N
Final assembly number
SIMULATION
PV Simulate value
PV Simulation
Faults
Warnings
Additional Transmitter Status
AI1
AI2
AI3
AI4
Quick Config
AI Channel
L_TYPE
XD_SCALE: EU at 100%
XD_SCALE: EU at 0%
XD_SCALE: Units Index
XD_SCALE: Decimal
OUT_SCALE: EU at 100%
OUT_SCALE: EU at 0%
OUT_SCALE: Units Index
OUT_SCALE: Decimal
Common Config
ACK_OPTION
ALARM_HYS
ALERT_KEY
HI_HI_LIM
HI_HI_PRI
HI_LIM
HI_PRI
IO_OPTS
L_TYPE
LO_LO_LIM
LO_LO_PRI
LO_LIM
LO_PRI
MODE_BLK: Target
MODE_BLK: Actual
MODE_BLK: Permitted
MODE_BLK: Normal
OUT_SCALE: EU at 100%
OUT_SCALE: EU at 0%
OUT_SCALE: Units Index
OUT_SCALE: Decimal
PV_FTIME
Advanced Config
FIGURE 6-3. XMT-P-FF Foundation Fieldbus/Model 375
Menu Tree (3 of 12)