Instruction manual

MODEL Xmt-P SECTION 11.0

MAINTENANCE

SECTION 11.0

MAINTENANCE

TABLE 11-1. REPLACEMENT PARTS FOR SOLU COMP XMT (PANEL MOUNT VERSION)

PART NUMBER DESCRIPTION SHIPPING WEIGHT

23823-00 Panel mounting kit, includes four brackets and four set screws 1 lb/0.5 kg

33654-00 Gasket, front, for panel mount version 1 lb/0.5 kg

33658-00 Gasket, rear cover, for panel mount version 1 lb/0.5 kg

TABLE 11-2. REPLACEMENT PARTS FOR SOLU COMP XMT (PIPE/SURFACE MOUNT VERSION)

PART NUMBER DESCRIPTION SHIPPING WEIGHT

33655-00 Gasket for pipe/surface mount version 1 lb/0.5 kg

23833-00 Surface mount kit, consists of four self tapping screws and 1 lb/0.5 kg

four O-rings

11.1 OVERVIEW

The Solu Comp Xmt needs little routine maintenance. The calibration of the analyzer and sensor should be

checked periodically. To recalibrate the sensor and analyzer, refer to sections 9 through 14.

11.2 REPLACEMENT PARTS

Only a few components of the analyzer are replaceable. Refer to the tables below. Circuit boards, display, and

enclosure are not replaceable.