Instruction manual

49
MODEL XMT-C SECTION 9.0
PROGRAMMING THE TRANSMITTER
DDeeffaauulltt DDiissppllaayy
Display Contrast
9.9.2 Procedure: Choosing a display screen.
Calibrate Hold
Program
DDiissppllaayy
1. Press MENU. The menu screen appears. Choose Display.
2. Choose Default Display.
3. Press

until the desired screen appears. Press ENTER. One of two dis-
play screen layouts can be selected for any measurement selected.
4. The display returns to the screen in step 2. Press MENU then EXIT to
return to the main display.
9.9 SELECTING A DEFAULT SCREEN AND SCREEN CONTRAST
9.9.1 Purpose
This section describes how to do the following:
1. Set a default screen. The default screen is the screen shown during normal operation. The Solu Comp Xmt
allows the user to choose from a number of screens. Which screens are available depends on the measure-
ment the transmitter is making.
2. Change the screen contrast.
Default Display
DDiissppllaayy CCoonnttrraasstt
Display contrast
Lighter
DDaarrkkeerr
9.9.3 Procedure: Changing screen contrast.
Calibrate Hold
Program
DDiissppllaayy
1. Press MENU. The menu screen appears. Choose Display.
2. Choose Display Contrast.
3. To increase the contrast, select darker. Press ENTER. Each key press
increases the contrast. To reduce the contrast, select lighter, Press
ENTER. Each key press decreases the contrast.
4. To return to the main display, press MENU then EXIT.
NOTE:
Screen contrast can also be adjusted from the main display. Press MENU
and  at the same time to increase contrast. Press MENU and

at the
same time to decrease contrast. Repeatedly pressing the arrow key increas-
es or reduces the contrast.