User manual

Activities Menu Menus • 35
The tree will be displayed that will mimic the nav-
igation tree, but it will be filtered to show only appli-
cation types supported for this version of setpoint
broadcast.
Selecting a top node will automatically select all
child nodes underneath.
Once the selection(s) have been made, click the
Save button. (At least one selection must be made.)
When specific child application nodes are selected
only those selected applications will be processed by
the Setpoint Broadcast.
If there are no valid applications selected when the
setpoint broadcast runs, that information will be saved
and visible in the Activity History details.
3.3.2.1. Schedules Setup
For all schedule pages:
The field selection control is identified with the
image of light grey dot to the right of the field. Use the
mouse and click to toggle on the image.
The Dot image identifies the field as one that will
not be saved to the controller. The Lightning Bolt im-
age identifies the field as one that will be saved to the
controller and will clear out the contents of the field.
When a field is changed by adding data, the selec-
tion image changes to the lightning bolt.
Character Deletion: When the lightning bolt im-
age is displayed and data is deleted from the field by
using the standard method of character deletion
(backspace key, delete key, control-x, mouse select /
cut) the image will not change. The image must be
clicked to change the state to the Dot image if field
data was not expected to be saved to the controller.
About Blank Fields: Blank fields can send blank
data to clear out a specific property in the controller.
Blank data fields can be selected by clicking on the
Dot image. This will change the selected state to the
Lightning Bolt image that identifies the field to be
sent to the controller.
Once you select the desired application, click Save
to open the respective page where you can make the
setpoint changes.
Users and Passwords Schedules Example:
This schedule includes 25 User names, passwords,
access levels, and auto log-offs.
Only properties whose values have been entered
will be sent.
Clicking Save will save the information entered
and close the pop up window.
Cancel will not save any data and will close the
pop up window.
Figure 3-55 - Configuring New Target Controller Group
Figure 3-56 - Users and Passwords Schedule Page