Installation guide

22 • Site Manager Installation Guide 026-1010 Rev 7 06-OCT-2011
tion tree where you can continue to add sites and
other view levels if desired.
Click Cancel to stop and exit the page.
8.5.3. Add A Control System
To add a Control System from the navigation tree:
1. Right-click the site you wish to add the control sys-
tem to (a control system is a descendant level of a
site).
2. Click Add Control System. The Control System
Configuration page opens.
3. Enter the control system information (Name, IP
Address) into the fields and click Save. The new
control system is visible in the navigation tree. Con-
tinue to add other view levels if desired.
8.5.3.1. Security Settings
Security settings for Site Manager are defaulted at the
group configuration level normally. Under the Optional
section on the Control System Configuration page: If the
protocol checkbox is enabled here (at the control system
level), Site Manager will use the protocol information en-
tered at the control system level and bypass the information
at the group level for only the units located under this con-
trol system.
8.6. Set Up Users (Optional)
It is recommended that a directory structure be set up
first, but users with administrator privileges can set up us-
ers and passwords:
1. Open the Admin Tools drop-down menu.
2. Click Setup > User Manager.
3. Click the Add New button. The User Configuration
page opens.
Figure 8-4 - Site Configuration Page
NOTE: Click the Refresh button at the
top of the navigation window to see any new
levels that have been added. The Windows
Refresh button on the browser will log you off.
Figure 8-5 - Control System Configuration Page