Installation guide

Database Setup Installation Steps • 11
22. The Choose Destination Location window will
open where the you may choose where the database
scripts will be stored:
a. Click Next to accept the default location or
Change to specify another location.
23. For Advisory Receiving Setup, enter the server
name or IP Address of where the advisories will be
sent and the open ports for E1 Port and E2 Port
fields:
These fields may be pre-populated with defaults; how-
ever, verify the IP address or server name entered in the
Address field is static
and visible from the controllers at
the site. This address should also belong to the machine on
which the installation is located. The ports entered must be
available and unused by any other application on this ma-
chine. Consult your network administrator for further in-
formation. Click Next to continue.
Email Setup
24. To send out advisories by email, enter the name of
the machine that will be hosting SMTP in the
SMTP field in the Email Setup window and click
Next. (Change the Port if necessary and enter the
Username if the SMTP server needs a login in or-
der to send emails.) If you do not want to set up
email sending, leave this field blank and click Next
to skip to Step 25.
25. If a username is entered, enter the password in the
window that appears below:
Figure 5-24 - Location for Database Scripts
Figure 5-25 - Advisory Receiving Setup
Figure 5-26 - Set Up Email Sending Ability
Figure 5-27 - Enter Password