Installation guide

4 • Site Manager Installation Guide 026-1010 Rev 7 06-OCT-2011
5 Installation Steps
If upgrading from a previous version of Site Manager,
you must first uninstall the program. Skip to the Upgrade
section of this install guide (Section 6, Upgrading Site
Manager).
1. Insert the Site Manager Installation CD into the CD
ROM drive to begin installation setup.
a. If the setup does not automatically start, go to
Start >Run and type “x:\setup.exe” where x is
your installation source location.
A confirmation window will appear asking if a database
server is installed and accessible:
b. Click Yes if you have one installed, No if you do
not have a database installed. Clicking No will
stop the setup and exit the program. A database
must then be installed, accessible, and a database
user-created with correct privileges to connect to
the database.
2. When Yes is clicked, the Site Manager InstallShield
Wizard window opens:
Click Next to continue.
3. The License Agreement window will open:
a. Read the “Terms of Use Agreement” and select I
accept the terms of the license agreement if you
wish to continue.
b. Click Next to continue.
Figure 5-1 - Preparing Setup
NOTE: You may choose which database and
Web server will be used.
Figure 5-2 - Is A Database Installed?
Figure 5-3 - Install Welcome
Figure 5-4 - License Agreement