Installation guide

AMS Suite: Intelligent Device Manager Installation Guide
NOVEMBER 2013
96
2. Create a user account for AMS Device Manager, ensuring that FMSPassthrough is
enabled and that KeyLevel is set to Console.
The following example shows the system interface user entry in the
USERFILE.CFG file. The user entry in bold is an example of an RS3 user entry. You
can create the system interface user entry by copying and pasting an existing
user entry in USERFILE.CFG and editing the entry for system interface.
<User
<Name RS3OpStation>
<Password RS3Performance>
<KeyLevel CONSOLE>
<Attributes
<ReadUsers ON>
<SendAlarms ON>
<FMSPassthrough ON>
<RemoteBoot ON>
>
>
<User
<Name AMS>
<Password Passthrough>
<KeyLevel CONSOLE>
<Attributes
<ReadUsers ON>
<SendAlarms ON>
<FMSPassthrough ON>
<RemoteBoot ON>
>
>
3. Save and close USERFILE.CFG.
Note
The username and password are case-sensitive in the USERFILE.CFG file. When entering
them in the AMS Device Manager Network Configuration utility, be sure to match the case.
Note
AMS ValveLink SNAP-ON application is not supported.