Installation guide

Installation Guide AMS Suite: Intelligent Device Manager
NOVEMBER 2013
71
Configure the Ovation Network System Interface (see “Configuring AMS Device
Manager for an Ovation System Interface” on page 90) so that AMS Device Manager
can detect and work with devices on the Ovation network.
Configure any other required communication interfaces (see “Configuring
communication interfaces” on page 73).
Uninstalling Ovation software
To uninstall Ovation on a station that has AMS Device Manager co-deployed, you
must uninstall AMS Device Manager first and then Ovation. You can then reinstall
AMS Device Manager. If you uninstall Ovation first, AMS Device Manager will not
function as expected.
If you have co-deployed AMS Device Manager on domain controllers and non-domain
controllers, you must remove AMS Device Manager from all non-domain controllers
first, then from all backup/secondary domain controllers, and then from the primary
domain controller. Uninstall Ovation only after AMS Device Manager has been
uninstalled on all PCs.
Note
Do not configure an Ovation Network System Interface for the same Ovation system on
more than one AMS Device Manager station.
Note
If you install a Client SC Station on an Ovation station running on a Windows Server PC, add
the Client SC Station PC name to the DNS forward lookup zones list. Contact your IT
department for assistance.