Installation guide

AMS Suite: Intelligent Device Manager Installation Guide
NOVEMBER 2013
68
Installing AMS Device Manager 12.5 on DeltaV
stations
AMS Device Manager 12.5 can only be co-deployed on DeltaV 9.3.1 and newer
stations. To ensure a proper installation, DeltaV must be installed before AMS Device
Manager.
Before you install AMS Device Manager on your DeltaV stations, ensure that you have
all the proper AMS Device Manager and DeltaV licensing and installation instructions
(see
“Licensing AMS Device Manager 12.5 on DeltaV stations” on page 67. In
addition, ensure that USB has been enabled in DeltaV Easy Security (see your DeltaV
documentation for more information).
To install Server Plus software on a supported DeltaV station, see“Installing Server
Plus Station software” on page 51. To install Client SC software on a supported
DeltaV station, see “Installing Client SC Station software” on page 54.
DeltaV actions
After installing AMS Device Manager on a DeltaV Station, you must perform a
download of the DeltaV workstation (refer to DeltaV Books Online). Downloading a
DeltaV 10.x or later workstation adds DeltaV database account users to the AMS
Device Manager database. Creating a new Windows user in DeltaV User Manager also
adds that user to the AMSDeviceManager Windows user group.
Note
Any AMS Device Manager station (either Server Plus or Client SC) installed on a DeltaV 11.3
or later ProfessionalPLUS workstation must be licensed to ensure proper licensing
functionality, proper security, proper user synchronization between DeltaV and AMS
Device Manager, and proper Device Description (DD) installation.
Note
If you are installing AMS Device Manager on any domain controller stations, refer to
“Installing AMS Device Manager on domain controllers” on page 65.
Note
Do not configure a DeltaV Network System Interface for the same DeltaV system on more
than one AMS Device Manager station.