Installation guide

AMS Suite: Intelligent Device Manager Installation Guide
NOVEMBER 2013
66
Domain controller security requirements
To launch and run AMS Device Manager, you must be a member of the
AMSDeviceManager user group.
Adding a user to the AMSDeviceManager group on a
domain controller
To add a user to the AMSDeviceManager group:
1. Select Start > Settings > Control Panel > Administrative Tools > Active Directory
Users and Computers.
2. Select <Domain Name> > Users.
3. Double-click the AMSDeviceManager group.
4. Click Add.
5. Enter the Windows User ID you want to add to the group and click OK.
6. Click OK.
Mobile workstation
A mobile workstation is an AMS Device Manager Client SC Station connected
wirelessly to a LAN. As long as the PC meets the AMS Device Manager requirements
(see
“Hardware requirements” on page 19), it functions like a station connected to a
wired Ethernet LAN. However, no system interfaces should be configured on a mobile
workstation, as this can cause database issues regarding the path of the connected
device. If at any time the mobile workstation wireless network connection is lost, you
may have to restart AMS Device Manager to reestablish network connectivity.
Note
The following procedure requires network administrator permissions.