Installation guide

AMS Suite: Intelligent Device Manager Installation Guide
NOVEMBER 2013
64
3. Rename the Client SC Station PC:
— Right-click the Windows desktop My Computer icon.
— Select Properties.
— Click Change Settings (Windows 7 only).
— On the Computer Name tab, click Change.
— Enter a new Computer Name and click OK.
— Click OK.
4. On the Server Plus Station, open Station Configuration and remove the old
name of the Client SC Station PC and add the new name (see
“Configuring a
Distributed System” on page 58).
5. Install AMS Device Manager on the Client SC Station PC (see “Installing Client
SC Station software” on page 54).
6. Reinstall the required system interfaces (see “Configuring communication
interfaces” on page 73) and SNAP-ON applications (see “Installing SNAP-ON
applications” on page 58).
7. Open AMS Device Manager, right-click each network icon and select Rebuild
Hierarchy and then Scan > New Devices.
8. Add the devices recorded in step 1 to the Device Monitor List on the Client SC
Station (refer to AMS Device Manager Books Online).
Adding a new communication interface
To add a new communication interface (for example, an additional system interface):
1. Contact your Emerson Process Management Sales/Service Office to obtain a
new license code for the desired communication interface.
2. Run the Licensing Wizard on the Server Plus Station (see “Licensing a
Distributed System” on page 57).
3. Configure the new communication interface (see “Configuring communication
interfaces” on page 73).