Installation guide

Installation Guide AMS Suite: Intelligent Device Manager
NOVEMBER 2013
57
Licensing a Distributed System
All licensing for an AMS Device Manager Distributed System is done on the Server Plus
Station. After installation, start the Licensing Wizard and follow the prompts to
gather registration information.
After you register your software, the Registration Center returns your license codes
and checksums by downloading from the AMS Device Manager registration website
at:
http://www.emersonprocess.com/systems/support/ams_register/
10.c.survey.login.asp
When you receive your license codes, run the Licensing Wizard on the Server Plus
Station to enter your license codes and checksums, which enables your system.
To run the Licensing Wizard:
1. Select Start > All Programs > AMS Device Manager > Licensing > Licensing
Wizard.
2. Follow the instructions in the Licensing Wizard.
3. If you are installing new license information on an existing station, start AMS
Device Manager to see the changes.
Note
To gather the registration information, you need to know your Customer Access Code
(supplied with your AMS Device Manager software).
Note
During the licensing process, you must have read access to the PC disk drive you installed
on (C: drive by default) so that the Licensing Wizard can verify the hard disk serial number.