Installation guide

Installation Guide AMS Suite: Intelligent Device Manager
NOVEMBER 2013
51
Installing Server Plus Station software
If you are installing an AMS Device Manager distributed system using a domain
controller, there are other requirements. See
“Installing AMS Device Manager on
domain controllers” on page 65.
To install software on the Server Plus Station:
1. Exit/close all Windows programs, including any running in the background
(including virus scan software).
2. Insert the AMS Device Manager program DVD in the DVD drive of the PC to be
used as the Server Plus Station.
3. When the AMS Device Manager setup starts, click Install AMS Device Manager.
4. Click Server Plus Station.
5. Follow the prompts.
Note
If you are upgrading your software and changing the station type, you must uninstall the
earlier version of AMS Device Manager before upgrading to 12.5. (See
Ta bl e 1 on
page 13.)
Note
If the autorun function is disabled on your PC, double-click
D:\AMSDEVICEMANAGER_SETUP.EXE (where D is the DVD drive letter) and click OK.
NOTICE
Do not interrupt the installation process, or the software will not be fully installed
and will malfunction. The installation process includes some system restarts. Do not
remove the program DVD until the installation is complete.