Installation guide

AMS Suite: Intelligent Device Manager Installation Guide

NOVEMBER 2013

Each Ovation controller uses a unique TCP/IP address. AMS Device Manager

communicates with HART devices, WirelessHART devices, F

OUNDATION fieldbus

devices, and devices connected to Ovation Safety Instrumented System (SIS) logic

solvers through I/O modules contained in the Ovation controller chassis, or in remote

nodes connected to the Ovation controller.

• Supported HART I/O hardware:

— Analog Input, 5X00058/5X00059, Version 9 or higher

— Analog Input High Performance, 5X00106/5X00109, Version 6 or higher

— Analog Output, 5X00062/5X00063, Version 8 or higher

— Analog Output High Performance, 5X00167, Version 1 or higher

• Supported FOUNDATION fieldbus I/O:

— Gateway 5X00151G01 and H1 Series 2 Module 5X00152G01, Version 1

or higher

— Module 5X00301 with cavity insert 1X00458H01 or Module 5X00301

with Personality Module 5X00327, Version 1 or higher (two each of

5X00301 and 5X00327 may also be configured to provide redundancy)

• Supported Intrinsically Safe controller:

— Ovation SIS Logic Solver, KJ2201X1-PW1, Version 1 or higher

• Supported PROFIBUS DP I/O (Ovation 3.3.1 and later, with the correct Ovation

patch):

— PROFIBUS module 5X00300/5X00321, Version 1 or higher (two each of

5X00300 and 5X00321 may also be configured to provide redundancy)

• Supported Wireless Gateway (Ovation 3.3.1 and later) with Smart WirelessHART

adapter (Ovation 3.4 and later):

— 1X00693H01 through 1X00693H04

PROVOX

The PROVOX System Interface requires:

• I/O type (inputs)–CL6822, CL6825, or CL6827

• I/O type (outputs)–CL6826 (will only support standard HART messaging, it will

not support AMS ValveLink Diagnostics); CL6828, P3.1 or greater (will support

standard HART messaging and AMS ValveLink Diagnostics)

• Controller options–SR90 P5.4 with I/O Driver P5.5 or higher or SRx P5.5 or

higher