Installation guide

Installation Guide AMS Suite: Intelligent Device Manager
NOVEMBER 2013
33
To run the utility:
1. Select Start > Run from the Windows taskbar.
2. In the text box, type C:\AMS\BIN\DELTAVFASTSCANUTILITY.EXE (where C is the
drive containing the AMS folder).
3. Uncheck the box for the appropriate DeltaV network.
4. Click Save Changes.
The AMS ValveLink SNAP-ON application is supported for DeltaV I/O and PROVOX I/O
cards, but not for RS3 cards.
See “PROVOX” on page 36 for I/O requirements.
The DeltaV System Interface supports AMS ValveLink Diagnostics. Analog output
modules configured for HART are required on the DeltaV substation for
communication with HART FIELDVUE digital valve controllers. F
OUNDATION fieldbus
FIELDVUE digital valve controllers need only be commissioned and ports
downloaded.