Installation guide

Installation Guide AMS Suite: Intelligent Device Manager
NOVEMBER 2013
31
• Supported HART I/O hardware and software revision:
— Analog Input HART Module, 8-channel, Series 1, Revision 2.21 or higher
— Analog Input HART Module, 8-channel, Series 2, Revision 1.26 or higher
— Analog Input HART Module, 16-channel, Revision 1.17 or higher
— Analog Output HART Module, Series 1, Revision 2.25 or higher
— Analog Output HART Module, Series 2, Revision 1.26 or higher
— HART AI 8 Channel Card, S-Series, Revision 1.26 or higher
— HART AI 16 Channel Card, S-Series, Revision 1.17 or higher
— HART AO Card, S-Series, Revision 1.26 or higher
• Supported Intrinsically Safe HART I/O hardware and software revision:
— Analog Input HART Module, 8-channel, Revision 2.39 or higher
— Analog Output HART Module, 8-channel, Revision 2.00 or higher
• Supported Zone I/O hardware and software revision:
— Analog Input or Analog Output, Revision 1.14 or higher
• Supported FOUNDATION fieldbus I/O hardware and software revision:
— Fieldbus H1, Series 1, Revision 1.8 or higher (does not support fieldbus
alerts)
— Fieldbus H1, Series 2, Revision 2.2 or higher
— Fieldbus H1 S-Series Integrated Power, Revision 4.87 or higher
— Fieldbus H1 S-Series, Revision 2.2 or higher
• Supported CHARM I/O hardware and software revision:
— CHARM I/O Carrier (CIOC), Revision 11.3.1 or higher
— AI 4-20 mA HART CHARM, Revision 1.18 or higher
— AO 4-20 mA HART CHARM, Revision 1.18 or higher
— AI 4-20 mA HART (Intrinsically Safe) IS, Revision TBD (Contact your local
Emerson Process Management Sales/Service Office for more
information.)
— AO 4-20 mA HART (Intrinsically Safe) IS, Revision TBD (Contact your local
Emerson Process Management Sales/Service Office for more
information.)

