Installation guide

Installation Guide AMS Suite: Intelligent Device Manager
NOVEMBER 2013
117
Adding devices to an AMS Device Manager
installation
All available information for supported field devices (other than device manuals) is
included and installed with the AMS Device Manager application. If it is necessary to
install additional devices after the initial installation, refer to Device Type Installation
in AMS Device Manager Books Online. Additional device descriptions can be
downloaded from the Internet. Copy this URL into your Internet browser: http://
www2.emersonprocess.com/en-US/documentation/deviceinstallkits/Pages/
deviceinstallkitsearch.aspx and enter device search information.
DTM Launcher
The DTM Launcher application is an AMS Device Manager application installed as part
of the AMS Device Manager installation. It enables users to install and use certain
HART, WirelessHART, and F
OUNDATION fieldbus Device Type Manager (DTM) drivers
with AMS Device Manager. DTMs are an alternative to the traditional Device
Descriptions (DDs) supported in AMS Device Manager. DTMs are provided by various
device manufacturers and are configured using the DTM Catalog Manager. For more
information, refer to AMS Device Manager Books Online.
AMS Suite Calibration Connector
AMS Suite Calibration Connector is a separately licensed and installed application
that integrates with Beamex CMX or AMS Suite APM/Meridium software to provide
full-featured calibration management capabilities beyond the basic features available
in AMS Device Manager calibration management. AMS Suite Calibration Connector
provides a solution for users to take advantage of the functionality of other
calibration management applications while maintaining the benefits of device
configuration and calibration management data synchronization.
AMS Suite Calibration Connector supports:
• AMS Suite APM version 3.5.1
• Beamex CMX version 3.0.414
AMS Suite Calibration Connector can only be installed on a Server Plus Station. You
must have Windows Administrator permissions to install AMS Suite Calibration
Connector.
To install AMS Suite Calibration Connector:
1. Insert the AMS Device Manager DVD in the DVD drive of your PC.
2. Double-click AMSSuiteCalibrationConnector_Setup.exe.