Installation guide
Installation Guide AMS Suite: Intelligent Device Manager
NOVEMBER 2013
113
Adding a username
To add a username at any time:
For a Standard User (see below for a Windows User):
1. Log in to AMS Device Manager User Manager (see above) and click Add User.
2. Select the Standard User option and click Next.
3. Enter a username and password and confirm the password.
4. Select the appropriate General and AMS ValveLink SNAP-ON application
permissions for this user. Refer to AMS Device Manager Books Online for more
information.
5. Click Next.
6. Verify the new user information and click Finish to add the new username to the
list of users.
7. Repeat for each additional Standard User.
8. Click Close.
ο
For a Windows User:
1. Add the Windows Username to the AMSDeviceManager group (see your
network administrator).
2. Log in to AMS Device Manager User Manager (see above) and click Add User.
3. Select the Windows User option and click Next.
4. Select the username from the list of users, and click Next.
5. Select the appropriate General and AMS ValveLink SNAP-ON application
permissions for this user. Refer to AMS Device Manager Books Online for more
information.
6. Click Next.
7. Verify the new user information and click Finish to add the new username to the
list of users.
8. Repeat for each additional Windows User.
Note
Once added, usernames cannot be deleted, but they can be disabled and the usersβ
permissions can be changed (see
βChanging rights and permissionsβ on page 114).