Installation guide

AMS Suite: Intelligent Device Manager Installation Guide
NOVEMBER 2013
112
The AMS Device Manager application allows an initial login with the username
“admin” and no password, which has AMS Device Manager System Administration
rights.
User permissions are set up and maintained in User Manager. You need AMS Device
Manager System Administration rights to log in to User Manager. The sections that
follow provide guidance in managing usernames and passwords.
Logging in to User Manager
To log in to the User Manager:
1. From the Windows taskbar, select Start > All Programs > AMS Device Manager >
User Manager.
2. In the User Manager Login dialog, enter the “admin” username (or any other
username with AMS Device Manager System Administration rights) and
password.
3. Select a Login Type from the drop-down list.
4. Click OK.
Assigning an “admin” password
To assign a password to the admin username:
1. Log in to User Manager.
2. Select admin and click Edit User.
3. Enter a password and confirm it.
4. Click OK.
NOTICE
To protect your data, assign a password to the admin username after you install AMS
Device Manager. See
“Assigning an “admin” password” on page 112.
Note
The admin username cannot be deleted or disabled, but the password can be changed.