Installation guide

AMS Suite: Intelligent Device Manager Installation Guide
NOVEMBER 2013
106
Det-Tronics
The Det-Tronics System Interface is used to monitor fire and gas detectors on the Det-
Tronics Eagle Quantum Premier system. Like other system interfaces, you use
Network Configuration to install it on your AMS Device Manager Server Plus Station.
You must install the Det-Tronics Safety System Software application (version 8.6.0.1)
prior to configuring the system interface. For additional information about the Det-
Tronics System Interface, refer to AMS Device Manager Books Online.
Configuring AMS Device Manager for a Det-Tronics
System Interface
To configure AMS Device Manager for a Det-Tronics System Interface:
1. Select Start > All Programs > AMS Device Manager > Network Configuration
from the Windows taskbar.
2. Click Add.
3. In the Select Network Component Type dialog, select Det-Tronics Network and
click Install.
4. Follow the Det-Tronics Network Wizard instructions.
5. Click Finish to save the changes and close the Network Configuration dialog.
6. Start AMS Device Manager. See “Determining the system interface structure
and device data” on page 108.
For additional information, refer to the Det-Tronics system documentation.