Technical data

Controls, LEDs, and Connectors
COMX-CAR-610 COM Express Carrier Board Installation and Use (6806800K26D)
48
3.5.6 EEPROM
P15 (2-3) Disable BIOS on the module
P38 Jumper Setting Configuration
P38 (1-2) Enable CS1 of BIOS on the module (Default)
P38 (2-3) Disable CS1 of BIOS on the module
Table 3-37 P17 Case Open Select Header
P17 Setting Configuration
P17 (1-2) Disable the case open select header (Default)
P17 (2-3) Enable the case open select header
Table 3-36 P15 and P38, Jumper Configuration to Enable/Disable BIOS (continued)
P15 Jumper Setting Configuration
Table 3-38 P31, EEPROM Header Pin Definition
Pin Signal
1I2C_CLK
2I2C_DATA
3GND