User's Manual

Operation and Display Panel
49 SOLA HD
®
S5KC
™
Settings
(continued)
Communication
Address
Sets the UPS device address. This setting is only for the network card
communication of newly emerging market.
Air Filter Reminder Set the reminder period of checking dust-proof filter
Air Filter Type
Standard: Use this setting if air filter is not installed.
Fine Dust: Use this setting if air filter is installed.
IT System
Compatibility
Enabled - Neutral back-feed relay will open on battery mode
Disabled (Default) - Neutral back-feed relay is always closed
UPS ID
Users can set the UPS name to facilitate managing the UPS through
remote communications
Company Name Set the local service company name of the UPS
Contact Number Set the local service telephone number of the UPS
Load factory
Defaults
Restores the setting items in ‘Settings’ menu to factory values
Battery settings
Low battery
Warning
Sets the battery low voltage alarm time
Automatic Battery
Test Interval
Sets the interval for the automatic battery test. Intervals of 8, 12, 16, 20,
26 weeks or Disable are available for selection. Factory default is 8
weeks.
Auto Batt Test
Start Day
Sets the day of the week for the automatic battery test
Auto Batt Test
Start Time
Sets the time of the day for the automatic battery test
External Battery
AH
Sets the AH capacity of external third party battery system to calculate the
battery capacity and estimate the battery time remaining
Load Factory
Defaults
Restores the setting items in ‘Battery set’ menu to factory values
Language Language Options
Provides a selection of seven languages:
Chinese, English, French, Spanish, Italian, Russian and German
Alarms Current Alarms Displays the current alarms. See Table 25 for the UPS alarm list
Records Historical Alarms Displays all historical alarms. See Table 25 for the UPS alarm list
Module
replacement
LCD Module Displays the procedures for replacing LCD module
Bypass Monitor
Module
Displays the procedures for replacing system monitor module
Bypass Control
Module
Displays the procedures for replacing system control module
Power Module Displays the procedures for replacing power module
Battery Module Displays the procedures for replacing battery module
Charger Module Displays the procedures for replacing charger module
Table 22 Item description of menu window and data window (continued)
Menu Name Data Item Data Description