Specification Sheet
S3K Series Instruction Manual • 11Visit our Web site at www.solahd.com
7.0 Software & Interface
7.1 Power Monitoring Software
UPSMON software (or other power monitoring software) utilizes a standard
RS-232 interface to perform monitoring functions and an orderly shutdown of
the protected equipment in the event of power failure. UPSMON displays all the
diagnostic symptoms on the monitor, including voltage, frequency and battery
levels. UPSMON is available for Windows applications and other OS compatible
solutions.
7.2 .NETpower Card (optional—S3K1600 models only)
The .NETpower card (P/N: SNMPCARDPC) provides an advanced, yet easy-
to-use network management function which supports both SNMP and HTTP.
Features include: multiple system shutdown, event notication, scheduling, and
control and conguration of the UPS remotely.
The .NETpower card must be inserted into the SNMP PORT on the rear panel of
the UPS. Please refer to the .NETpower card CD-ROM for further instructions.
7.3 Interface Kits (optional)
Interface kits include a required interface cable to convert status signals from the
UPS into signals which an individual operating system will recognize.
The interface cable must be connected to the REMOTE PORT on the rear panel
of the UPS and to the host computer (either COM 1 or COM 2). Please refer to
the READ.ME le for further instructions.
CAUTION: Use only factory supplied or authorized UPS interface cables!
7.4 Remote Port (computer interface)
The REMOTE PORT on the rear panel of the UPS may be connected to a host
computer to allow for UPS status monitoring and operation control. Functions
include:
• Broadcasting a warning when power fails;
• Closing any open le before the batteries are exhausted;
• Turning off the UPS.
Please refer to 7.4.1 on page 12 for Remote Port PIN Congurations.