Data Sheet
Bulletin 71.1:S200
3
—The S200 Series uses a rugged two-bold actuator to body
connection, which allows the easy and reliable access to the orice and seat
disk for inspection.
—The S200 and 299H Series
use the same body and orices. As a result,
the S200 Series can easily be upgraded
to a 299H Series without removing the
regulator body from the pipeline.
—Several choices of orice sizes
to accommodate wide range of ows
and inlet pressures.
—The S200 Series can
be congured with a Type VSX-2 integral slam-shut
device to provide Overpressure Shutoff (OPSO) or
Over (OPSO) and Underpressure Shutoff (UPSO).
™
—The S200 Series can be
congured with an integral monitor, which
functions independently from the main
regulator to limit downstream pressure.
—A wide variety of sizes, body materials and end connection styles available:
NPS 1-1/4, 1-1/2, and 2 / DN 32, 40, and 50 body sizes available in ductile iron, steel, and cost effective cast
iron available with NPT, BSP, CL125 FF (available with 7.5-inch or 10-inch / 191 or 254 mm face-to-face
dimensions), CL150 RF, CL250 RF, CL300 RF, and PN 10-16 end connections. (Not all sizes and/or materials
are available with all end connections. See Tables 1 and 2 for available congurations.)