Instruction manual

NGA 2000 MLT Hardware
INSTALLATION
5 - 3
Emerson Process Management GmbH & Co. OHG
Instruction Manual
90002929
07/2006
TRANSFER SAFETY LOCK !
First of all operations unscrew transfer safety lock of MLT 1/ULCO or MLT 2 !
MLT 1/ULCO: Unscrew both knurled-head screws on bottom side of the housing
(Fig. 5-1a) ! For protection against loss screw the knurled-head screws into
the respective holders at housing rear side (Fig. 5-1b) !
MLT 2: Unscrew transfer safety lock of photometer sliding carriage (Fig. 5-
1c)!
For transport of MLT the transfer safety lock absolutely have to be locked !
5.1.1 Transfer Safety Lock of MLT 1/ULCO or MLT 2
TRANSFER SAFETY LOCK OF MLT 1/ULCO OR MLT 2
Fig. 5-1a: Transfer safety lock MLT-ULCO
(housing side view, detail sketch)
Fig. 5-1b: MLT 1, Rear panel (holder for safety lock)
Fig. 5-1c: MLT 2, Photometer safety lock
Transfer safety lock (two knurled-head screws)
Front panel